Making a difference for our customers
316
Model: WTP1560 Category: Metal Plasma Cutting Machine
USD
6500-9200$ FOB Qingdao
CNC plasma cutting machine can cut many kinds of sheet metal,such as stainless steel,carbon steel,iron,aluminum and so on.
Applications of cnc plasma cutting machine for metal:
cnc metal plasma cutting machine can be used in advertising industry: advertising signs, logo making, acrylic cutting, plastic molding, a variety of materials, decorative products, production of advertising.
cnc metal plasma cutting machine can be used in metal industry: for steel, copper, iron, aluminum, galvanized plate, titanium plate and other metal sheet cutting (plate and tube).
Features of cnc metal plasma cutting machine:
1) cnc metal plasma cutting machine adopt bench-gantry structure, welding after the vibration aging treatment to eliminate stress, so that in the long-term use of no deformation
2) All mechanical drive system using rolling bearings and precision machining accuracy as 6 GB of precision gears mesh with the rack
3) Planetary reduce drive system, its input and output error of only 16 arc minutes, at the same time, in the horizontal and vertical structure of the gear drive, an increase of automatic clearance compensation device so that it can accurately drive the structure of the implementation of the directives issued by the CNC.
4) Take the initiative to end beam: vertical track for the introduction of automatic clamping device-oriented structure and there is no eccentric clamping structure, relying on automatic detachable power-oriented structure to make it two. In the track combined with the smooth running of the department will not have a wheel clamp tight or lax-phenomenon.
Different cutting thickness need different plasma source :
Techcnial Parameter of cnc plasma cutting machine:
|
Model |
cnc plasma cutting machine |
|
Working size |
2000mm*3000mm/1500*3000mm/1200*2500mm |
|
Repeat positioning accuracy |
±0.05mm |
|
Traveling speed |
0-24000rpm/min |
|
Cutting speed |
10-15m/min |
|
Transmission model |
Gear rack drive |
|
Transmission system |
X,Y Taiwan Hiwin high-precision, |
|
Operating System |
START or Starfire with USB Interface |
|
Driver |
Leadshine stepper or servo motor |
|
Plasma power supply |
Huayuan or USA Hypertherm |
|
Cutting thickness |
0.1-30mm |
|
Cutting type |
Plasma/oxy-acetylene or propane |
|
Input voltage |
3 phase,220v/380v±10% |
|
Mode of file transfer |
USB Interface |
|
Guide way |
Imported square rail |
|
Table-board |
Steel blade saw tooth mesa |
|
Straight line positioning precision |
±0.2mm/10m |
|
Straight line repeat precision |
±0.3mm/10m |
|
Environmental temperature |
-5~45°C |
|
Humidity |
<90% No concreting |
The advantages of our cnc plasma cutting machine for metal :
1.cutting faster, more accurate control, the cutting surface is more smooth, no glitches, no black; cutting holes in high quality
2.Stability and reliability for light path system and control system
3.Humanizing design, convenient operation
4.High performance price ratio, low operating cost >High cutting efficiency and quality, no noisy. Small heat influence area, cutting seam smooth and no deformation, post treatment is not needed
5.The machine adopt Beijing START plasma control system, standard high sensitivity arc voltage device 6.High precision stepper motor and driver, ensure the efficiency and accuracy, increasing the stability and reliability greatly.
We have more cnc plasma cutting machine for your choice :
WINTEK CNC PLASMA CUTTING MACHINE
